Are your models over-trained ? The weightwatcher tool can detect the signatures of overtraining in specific layers of a pre/trained Deep Neural Networks.

In the Figure above, fig (a) is well trained, whereas fig (b) may be over-trained. That orange spike on the far right is the tell-tale clue; it’s what we call a* Correlation Trap. *

Weightwatcher can detect the signatures of overtraining in specific layers of a pre/trained Deep Neural Networks. In this post, we show how to use the weightwatcher tool to do this.

### WeightWatcher

**WeightWatcher** (WW): is an open-source, diagnostic tool for analyzing Deep Neural Networks (DNN), without needing access to training or even test data. It analyzes the weight matrices of a pre/trained DNN, layer-by-layer, to help you detect potential problems. Problems that can not be seen by just looking at the test accuracy or the training loss.

**Installation**:

```
pip install weightwatcher
```

**Usage:**

```
import weightwatcher as ww
import torchvision.models as models
model = models.vgg19_bn(pretrained=True)
watcher = ww.WeightWatcher(model=model)
details = watcher.analyze(plot=True, randomize=True)
```

For each layer, Weightwatcher plots the Empirical Spectral Density, or ESD. This is just a histogram of the eigenvalues of the layer correlation matrix **X=W ^{T}W**.

```
import numpy as np
import matplotlib,pyplot as plt
...
X = np.dot(W,W.T)
evals, evecs = np.linalg.eig(X(
plt.hist(evals, bin=100, density=True)
...
```

By specifying the randomize option, WW randomizes elements of the weight matrix **W**, and then computes the it’s ESD. This randomized ESD is overlaid on the orginal ESD of **X**, and ploted on a log scale.

This is shown above. The original layer ESD is **green**; the randomized ESD is **red**, And the **orange line **depicts the largest eigenvalue of the randomized ESD.

If the layer is well trained matrix, then when **W** is randomized, it’s ESD will look like that of a normally distributed random matrix. This is shown in Figure (a), above.

But if the layer is over-trained, then it’s weight matrix **W** may have some unusually large elements, where the correlations may concentrated, or become *trapped*. In this case, the ESD may have 1 or more unusually large eigenvalues. This is shown in Figure (b) above, with the **orange line** extending to the far right of the bulk of the **red** ESD.

Notice also that in Figure (a), the **green** ESD is very Heavy Tailed, with the histogram extending out to log10=2, or a largest eigenvalue of nearly 100: . But in Figure (b),, the green ESD has a distinctly different shape and is smaller in scale than in Figure (a). In fact, in (b), the **green** (original) and **red** (randomized) layer ESDs look almost the same, except for a small shelf of larger **green** eigenvalues, extending out to and concentrating around the **orange line**.

**In cases like this, we can identify the orange line as a Correlation Trap. **

This indicates that something went wrong in training this layer, and the model did not capture the correlations in this layer in a way that will generalize well to other examples.

### Conclusion

Using the Weight Watcher tool, you can detect this and other potential problems when training or fine-tuning your Deep Neural Networks.

You can learn more about it on the WeightWatcher github website.

## One comment